The Model 13792 is a broadband portable target projector used for characterizing the performance of a wide variety of infrared sensor systems. The system incorporates SBIR standard components to provide accurate and precise stimulus to sensors under test in laboratory, depot and production line environments. Testing can be automated with the use of IRWindows™ test system controller that reduces test times and cost, while improving the consistency and accuracy of test results.

Print Friendly, PDF & Email

Broadband, 400 nm through 14 microns

4″ infrared source

12 position target wheel

Manual and automated operation

Most complete and advanced test software available, IRWindows™

Collimator
Clear Aperture 9"
Focal Length30"
Field of View5.7º
Reflectance<93%, 3-14 microns
Blackbody
Available Sizes4” Source
Standard Temperature Range A     -25ºC to +75ºC ΔT, 0ºC to 100ºC Absolute
Emissivity (Average)> 0.970 (3µm to 5.5µm), > 0.950 (8µm to 14µm)
Uniformity>98% of Tset – Tambient or 0.10ºC whichever is greater, over 90% of the emitting surface area
Absolute Accuracy±0.010ºC for 0ºC
Differential Accuracy±√[(T1 error)2+(T2 error)2] where error is ±0.010ºC for 0ºC
StabilityσT≤0.001ºC (0ºC to 50ºC), σT≤0.002ºC (-40ºC to 0ºC and 50ºC to 100ºC), σT≤0.003ºC (110ºC to 175ºC)
Display Resolution0.001ºC or 0.0001ºC
Setpoint Resolution0.001ºC
Ready Indicator Selectable±0.001ºC to ±5.000ºC
SLEW RATE1
Approximate Heating Rate+0.40ºC/sec. at 25ºC
Approximate Cooling Rate-0.20ºC/sec. at 25ºC
Settling Time<45 seconds
ENVIRONMENTAL
Operating Temperature0˚C to 50˚C
Storage Temperature-20˚C to 70˚C
Relative Humidity5% to 95%, non-condensing
Power Requirements100-120/220-240 VAC at 60/50Hz
Maximum Power Consumption850W-1600W depending on size and temperature range
Approximate Blackbody WeightDB-04—15 lbs., DB-06—25.0 lbs., DB-08—40.0 lbs., DB-12—50 lbs.
Approximate Controller Weight15.0 lbs.

Notes:
1) Slew rate for 4” model shown. Slew rates vary depending on blackbody size and environmental conditions 

Please contact the SBIR sales team at (805) 965-3669 or sales@sbir.com for applications engineering assistance or specific test needs.

Information subject to change without notice.