Visible Light Source/Integrating Sphere

The Infinity VSX Series Integrating Sphere systems are ultra uniform, highly accurate broadband light sources.

Testing and calibration of CCD cameras, radiometers, photometers, and remote sensing systems are performed easily and accurately with this compact, rugged system

SBIR specializes in providing hardware and software solutions that reduce test times and cost, while improving the consistency and accuracy of test results.

Print Friendly and PDF
Infinity VS Series Integrating Sphere Pic
  • Wide Dynamic Range
    Luminance level can be easily adjusted via the front panel of the controller or via computer interface (Ethernet, IEEE-488 GPIB or RS-232). Sphere luminance is continuously adjustable over a dynamic range of more than seven orders of magnitude.

  • Broadband Output
    A tungsten halogen light source provides broadband output from 400 to 2400 nm. Optionally, each system can be spectrally characterized during calibration.

  • Spectral Band Compensation
    A software application is included with each system that is used to store spectral curves. This is either set up at the factory or by the user within IRWindows4. This allows the selection of a band pass region to match the UUT response band pass. The set point is automatically adjusted to compensate for the average attenuation as well as the source spectrum in the selected band pass to maintain the correct radiance output level.

  • Selectable Units for Display and Setpoint
    Setpoint and displayed units can be selected from ft Lamberts, Lm/cm2 /sr and µW/cm2 /sr as well as user selectable units.

  • Detector Auto Zero
    Full accuracy of the luminance feedback at low light levels is maintained with automated measurement and compensation of the detector's dark current.
  • LabVIEW Driver Support
    SBIR Infinity blackbodies and integrating spheres can be easily incorporated into your LabVIEW application routines.

  • Multi-Function Controller
    The controller features a touch screen display and supports remote computer control over Ethernet or RS-232. The controllers are also available with an optional IEEE -488 Interface.

    The controller will also operate all of the SBIR peripherals: target wheels, visible illuminators, pulsed laser diodes, range slides, source slides and filter wheels.

    Controller
  • Automated Testing
    The Infinity VSX Series Systems can be operated from the touch screen panel, or via Ethernet, RS-232 and IEEE-488 GPIB interfaces. The Infinity Series is also optimized for seamless integration with the SBIR's IRWindows™4 test software. IRWindows™4 is an advanced software tool that automates the setup, execution, data collection and results analysis for industry standard performance testing of infrared, visible and laser sensor systems.
Infinity VS Series Integrating Sphere Pic
  • IEEE Std. 488 Interface (GPIB)
    The thorough implementation of the ANSI/IEEE Std. 488.1-1987 allows for computer control of all integrating sphere commands, calibration and target wheel functions.

  • RS-232 Serial Interface
    An optional serial interface provides computer control of all integrating sphere calibration and target wheel functions.

  • Targets
    Many standard and custom visible targets are available. See the Target section for details.

  • Target Wheels
    Multiple targets can be rapidly and precisely positioned in front of the integrating sphere. Target position can be set from the front panel of the controller or via the optional computer interface. For details on the full line of target wheels see SBIR’s Target Wheel section.

  • Rack Mounting
    The integrating sphere controller is designed for bench-top or standard 19 inch rack use. Rack mounting ears come standard with the instrument. A rack slide kit is also available.

Infinity VS Series Integrating Sphere Pic Click on one of the below links to view a PDF outline drawing:

PDF outline drawing 2-inch
PDF outline drawing 4-inch
Infinity Controller PDF







Exit Aperture Diameter 2.75" and 4"
   
Light Source Integrating sphere/tungsten filament
   
Standard Output Range1 (Luminance) VSX-02 10-3 to 3,000 fL
VSX-04 10-3 to 1,250 fL
(at 2856 K color temperature) 
   
Stability ±1 x 10-3 fL or +0.10% of setpoint, whichever is greater
   
Setpoint Resolution 1 x 10-3 fL or 0.10% of setpoint, whichever is greater
   
Luminance Accuracy ±1 x 10-4 fL or 2.5% of setpoint, whichever is greater
   
Uniformity 98% over 20° FOV
   
   
Settling Time < 60 seconds
Ready Indicator Selectable ± 0.1% - 100%
Line Voltage Selectable 100 / 120 / 220 / 240 V, 50 - 60 Hz
   
Visible Source Weight VSX-02—26.0 lbs., VSX-04—35.0 lbs.
   
Visible Source Controller Weight 12 pounds
   
Environmental  
Operating Temperature 20˚C to 25˚C
Storage Temperature 20˚C to 70˚C
Relative Humidity 5% to 95%, non-condensing

Notes:

  1. Other luminance ranges are available - consult factory for details.






Infinity VS Series Integrating Sphere Pic Integrating Sphere 3D models for download:

VSX-02 2” DIAMETER INTEGRATING SPHERE ZIP
VSX-04 4” DIAMETER INTEGRATING SPHERE ZIP









Infinity VS Series Integrating Sphere Pic

SBIR classifies Visible Source model numbers based on six different features that a customer can choose from. Features include integrating sphere source size, detector type, luminance range, country’s power cable type, cable length and communications interface options.

Note: Due to the complexity of matching the detector types and luminance range combinations, please contact the SBIR sales team at (805) 965-3669 or sales@sbir.com for assistance to ensure the proper part number is selected.


Information subject to change without notice